Gallery wall with three posters – three measured layouts
Share
Three posters can form a long row, a compact group or a mix of portrait and landscape designs. The same poster format uses different wall space depending on the arrangement.
Here we compare three layouts with 50 × 70 cm posters. The dimensions include frames and gaps so you can check what fits at home.
What the calculations include
The examples use E-Line oak frames for 50 × 70 cm posters. Their published outside dimensions are 52.4 × 72.4 cm. In landscape orientation, that means 72.4 cm wide and 52.4 cm high. Gaps are 8 cm between outside frame edges.
The dimensions come from BGA’s E-Line Oak 50 × 70 cm product specification, not our own physical measurement. Use your own frames’ outside dimensions if different. Eight centimetres is chosen for comparison, not a rule for every gallery wall.
| Layout | Total width | Total height |
|---|---|---|
| Three portrait frames in a row | 173.2 cm | 72.4 cm |
| Two portrait frames above one | 112.8 cm | 152.8 cm |
| One landscape beside two portrait frames | 132.8 cm | 152.8 cm |
These are fairly large groups. Check both width and height: a narrower layout need not use less space overall.

1. Three portrait posters in a row
Place three portrait frames side by side with level top edges. Leave 8 cm between the first and second and the same between the second and third.
Width: 52.4 + 8 + 52.4 + 8 + 52.4 = 173.2 cm. Height: 72.4 cm.
This is the widest and lowest option. Try it where you have plenty of horizontal space. Above furniture, the group must suit the furniture’s width and position, not just fit the wall.
A row also makes differences between designs clear. Start with matching frames and sizes if you want the pictures to provide the variety.
2. Two portrait frames above one
Hang two portrait frames side by side and centre the third below them. Leave 8 cm between the upper frames and 8 cm from their bottom edges to the lower frame’s top edge.
Width: 52.4 + 8 + 52.4 = 112.8 cm.
Height: 72.4 + 8 + 72.4 = 152.8 cm.
This group is narrower but more than twice as tall as the row. Position the lower frame’s left edge 30.2 cm inside the group’s left edge to centre it under the pair.
Pay particular attention to the lowest frame. This layout needs substantial vertical clearance and does not automatically suit a space above a sofa just because its width fits.
3. One landscape beside two portrait frames
Stack two portrait frames on the right with an 8 cm gap. Place the landscape frame on the left, vertically centred beside the entire stack. Leave 8 cm between it and the stack.
Width: 72.4 + 8 + 52.4 = 132.8 cm. Height: 152.8 cm.
The landscape frame’s top edge sits 50.2 cm below the group’s top edge, centring it against the two portrait frames.
Choose a design intended for landscape display. Turning a frame does not make a portrait illustration or quote poster suitable. Compare our landscape posters.
Use the sketch for planning, not drilling
The sketches use the same scale, but are not full-size printable templates. Dimensions refer to outside frame edges, not hook positions.
Make paper templates for your own frames. Label the designs and try the whole group on the wall. Allow room for lamps, furniture and doors. Follow frame and fixing instructions when hanging.
You can use these layouts with smaller formats, but recalculate the measurements. For the row, add three outside widths and two gaps. For layout two, width is two outside widths plus one gap; height is two outside heights plus one gap.
Compare other formats in our poster size guide. For help choosing designs, start with our guide to creating a gallery wall.
Once you know what fits, browse 50 × 70 cm posters and check the available sizes of each design.